Strategic planning, implementing efficient processes, and installing efficient equipment produces quality products.
Air drying technology in CNC machine shops is an important tool; cleaner, drier air helps your equipment perform with greater precision and accuracy. Controlling corrosion, eliminating contamination, and even avoiding oxidation build up not only help the equipment, it can also improve productivity outside of the machines when the air is used for part blow off or secondary equipment use.
Key questions to ask:
These need to be answered in order to provide peak system and facility performance.
Discussed in this article:
CNC machine shops require clean, dry air for a variety processes and equipment; CNC mills and lathes, clamping technology, rotary chucks, robotic technology, etc. Each of these applications may require different dryer technology to meet the equipment manufacturer’s specifications. There are four types of drying technology available:
Which technology to use and where - that is the question. Sometimes you need to look at integrating multiple dryer technologies to solve specific equipment and application needs.
Refrigerated air dryers are the most common technology used in manufacturing and machining plants to dry the compressed air system.
How it works: The hot compressed air passes through a heat exchange where compressed air and refrigerant lines run side by side. This process allows the cool refrigerant to physically condense the water vapor into liquid water. Commonly, they will have a bulk water filter integrated in the unit to disperse the condensed liquid.
There is constant maintenance on keeping the heat exchange and surrounding areas free and clear of dust and dirt. In addition, servicing the refrigerant can be a nightmare with all the regulations surrounding refrigerants and the high cost.
Due to their efficiency and cost-effectiveness, regenerative dryers are also gaining in popularity for CNC machine shops.
How it works: air dryers use multiple canisters of desiccant to remove water vapor from the compressed air. Then some of the dry air goes through the media a second time to dry the media. This allows it to be ready for the next use.
Regenerative dryers are best suited for CNC machining applications where there is high demand for air that is extremely clean and dry. Shops located in high-humidity areas may consider this dryer the best investment.
This technology uses the same core material as is used in regenerative dryers - desiccant.
How it works: The desiccant removes water vapor through an adsorption process to ensure all water is out of the air flow. Because of this, this technology provides very dry air downstream.
Some desiccant dryers may allow for externally regenerating the media through a process using high heat to “bake” the water vapor away, but this is not convenient. Therefore most users of this technology simply replace the desiccant cartridge when it becomes saturated. It's a great solution for immediate dry air with low up-front costs, and creates crisp, dry air needed for applications.
This technology utilizes hollow fiber tubes which are commonly wound together and contained in a housing.
How it works: As wet air from the compressed air system passes through these hollow tubes, water vapor molecules are allowed to permeate through the tube walls, thereby drying the air going downstream. At the outlet end of the membrane dryer there is a large orifice which redirects a significant amount of the dry air to pass through the housing, around the hollow tubes where the water vapor is then ejected through the “sweep” holes at the other end of the dryer housing.
Membrane drying technology is very useful to have when you are required to have clean, dry air in an area where electrical power is not present or is not wanted for safety concerns.
Having the best air dryer for your CNC machine shop ensures the machining process runs smoothly. By carefully considering each type of dryer, it's possible to select one that perfectly meets your operation's specific needs. With the right dryer in place, your CNC machining projects will be successful and efficient.
Compressed air comes in handy for a number of situations, from keeping the workspace clear to actuating systems. The best air dryer for your shop will:
Projects have deadlines, and CNC machine shops typically operate with little margin for error. In the event a compressed air system isn’t living up to expectations, downtime and rising overhead costs can result. Here are four common issues that contribute to downtime via a compressed air system:
By selecting the best air dryer for CNC machine shops, companies can realize improved quality, precision, and accuracy in their machining operations - all while keeping costs down.
Dry air provides efficiency and assists in quality production. Choosing the perfect dryer for your CNC machine shop depends on the humidity in your area and the needs of your specific workshop. Remember, neglecting your compressed air dryer can mean severe consequences for your budget and your product timelines.
The Tsunami team is available to discuss the layout of your workshop and highlight specific areas where compressed air pressure needs to be optimized. Reach out to your representative today.